FYZ1126 RF Transmitter 433MHz Remote Control

Features:
100% brand new and high quality.
About Working Mode:
- Momentaneous: Push the button of the remote control, the relay connects, release the button of the remote control, the relay dis-connects.
- Alternate: Push the remote control button once, the relay switches on, push the remote control button twice, the relay switches on.
- Lock: Push the UMA remote control button, the relay connects, push the remote control button B, the dis-connect relay.
- Delay time mode: Push the button on the remote control, the relay switches on, after releasing the button of the remote control, after 5S or 10 s or 15 s, the relay switches off automatically.
Clearing the code:
- Press the learning button on the receivers to 8 times, the codes will be cleared.
- After clearing the code, the whole remote does not work anymore.
Learn the code: ( Momentary )
- Press the learning key on the receiver once the time, it enters momentary adjustment mode.
- Wait a moment, the LED will turn off, it goes into a learning state.
- Push the button on the remote control, the LED indicator on the receiver board blinks and then exit.
- After 3 seconds, the LED indicator will be on again, learning successfully.
Learn the code: ( Alternate )
- Press the learning key on the receiver time twice, it goes into toggle configuration mode.
- Wait a moment, the LED will turn off, it goes into a learning state.
- Push the button on the remote control, the LED indicator on the receiver board blinks and then exit.
- After 3 seconds, the LED indicator will be on again, learning successfully.
Learn the code: ( Lockdown )
Note: When you choose to lock mode in order to learn more remote control, you need to learn two different buttons, the first time I learned is to "ON", the second time I learned to "OFF".
For example: ONE button = ON, button B = OFF
- Press the learning key on the triple receiver time, it goes into lock mode.
- Wait a moment, the LED indicator on the receiver board blinks and then exits.
- Press the button on the remote control A.
LED Flash 5 times.
- Press the remote control button B.
Flash Led for 5 times.
- After 3 seconds, the LED indicator will be on again, learning successfully.
A = ON, B = OFF.
Learn the code: ( Time delay mode )
- Press the learning key on the receiver back time, the delay time for 5 seconds.
- Press the learning key on the receiver for the fifth time, the delay time for 10 seconds.
- Press the learning key on the receiver for the sixth time, the delay time for 15 seconds.
The LED indicator turns off.
- Press the button on the remote control, the LED flashes and off.
- After 3 seconds, the LED indicator will be on again, learning successfully.
NOTE: The system can store to 50 pcs of remote controls, if the remote control gets more than 50 pcs, after the remote control will be lost.
Specifications:
Model: KR2201 - 4
Material: Plastic + Metal
Black color
Power Input: DC10V - 14V
Standby Current: less than 5MA
RF Frequency: 433 m
RF working mode: superheterodyne
Get Sensitivity: more than 97dbm
Transmission distance: more than 100 m ( open space )
Decoding mode: MCU decoding software
Remote Storage: 25pcs
Remote support type: Learning code, Fixed code ( Rolling code can be the project )
Working Mode: Momentary, Alternating, Locking Time Delay ( 5s, 10s, 15s )
Wiring type: fixed terminal
Output terminal: NO, NC, COM
Wiring Diagram:
+ V: 12V + input;
- V: 12V - input;
N degree: Output, normal open;
COM: Output, common;
NC: Exit, normal close